Smartphone/Tablet – jnfhrio.shop

Pokemon Center Original Phone Ring Attachment Sprigatito

pkversion — Tue, 15 Oct 2024 13:25:19 +0000

Size is approx. 8.3 by 5.1 by 1cm

Insert your finger through the ring to easily support holding your smartphone.

Since you can attach the carabiner to items like your bag’s strap, it’s convenient for carrying or attaching straps.

– It is recommended to use a smartphone case with a charging cable port width of 10-15mm.
– Even if the dimensions are recommended, depending on the combination of smartphone and case, and the case material, it may come off easily.
– After attaching this product, pull the carabiner to ensure it does not come off easily before use.

Pokemon Center Beads Hand Strap Pikachu

pkversion — Tue, 15 Oct 2024 13:12:12 +0000

10 by 2.7 by 1cm

Additional product info; Just Insert It Between Your Smartphone And Case! Ideal Bead Hand Strap For Preventing Drops.

Usage Instructions
1. Set the strap sheet in the smartphone case and pull the sheet’s flap out from the case.
2. Attach the smartphone to the case.
3. Attach the carabiner to the bottom of the sheet.

Usage Precautions
– This product is an item used in combination with a smartphone case for the back. It cannot be used alone.
– This product does not include a smartphone case.
– This product is a smartphone-specific accessory. It cannot be used with tablets.
– Do not use this product for purposes other than its intended use.
– The load capacity of the strap sheet is approximately 5 kg. Pulling or swinging it strongly while attached may cause damage or the device to fall. Please do not do this.
– Due to the characteristics of the material, the strap sheet may discolor. Please be aware of this in advance.
– Using it in a wet state from rain or sweat may cause color fading or transfer. Please be aware of this in advance.
– When inserting the strap sheet, make sure that no dust or debris is on the device or case.
– Depending on the shape of the case used, the strap sheet may not be usable. Please confirm this in advance before purchase. Additionally, charging cables may not fit in some cases. In such cases, please remove the product during charging.
– To prevent deformation or deterioration, avoid storing in direct sunlight, high temperature, high humidity, or near fire.
– We do not take any responsibility for troubles or accidents that occur due to using this product.
– Keep out of reach of small children.
– Specifications may change without notice for the purpose of improvement or advancement.

Shape Of Usable Phone Cases
Usable: Cases with a 12 mm or larger opening at the bottom center
Not Usable: Cases that are fully open at the bottom

Pokemon Center Original Retro-Style Phone Case for iPhone 7/8 Pichu Scorbunny Alcremie

pkversion — Tue, 15 Oct 2024 12:49:20 +0000

Size is approx. 15.7 x 7.0 x 1.0cm

iPhone SE (3rd/2nd generation) 7/8 compatible

Pokemon Center Maru Rika And Plus Strap Set Tandemaus 922D

pkversion — Tue, 15 Oct 2024 11:22:33 +0000

Size is approx: 70.0 by 5.0 by 1.7cm

Additional product info: You can use the Maru Rika Angle Plus to support holding your smartphone by inserting it into the smartphone case, or attach it to a bag for various uses. The shoulder strap can be adjusted to any length by attaching or detaching parts.

The image is for illustration purposes only.
The smartphone is not included.

– This product is a shoulder strap type. It is recommended for smartphone cases with a charging port size of 10-15 mm in width and a hole thickness of 6.5 mm or more. Even if the dimensions are recommended, the combination of smartphone and case may make it easy to come off.
– Do not give this product to infants and young children, as there is a risk of suffocation from swallowing or wrapping the strap around the neck. Especially, keep detached strap parts out of their reach.
– Do not run, jump, or jump down from a high place while the smartphone is attached to this product. Rough use can cause the strap to detach and lead to the smartphone falling.
– Using excessive force when detaching the strap parts may cause damage.

Pokemon Center Mobile Acrylic Strap Ponyta Galar Form

pkversion — Tue, 15 Oct 2024 10:33:53 +0000

Size is approx; 13.9 by 4.2 by 1.0cm

Additional product info;
It is an acrylic charm with a strap that can be attached to mobile phones and smartphones.

You can remove the strap (black string) and attach it as a charm to bags, pouches, etc.

Do not apply strong force while using this product.

Do not wrap the cord around fingers or other body parts.

Pokemon Center Smartphone Ring Unova Region

pkversion — Tue, 15 Oct 2024 10:02:58 +0000

Size is approx; 5.6 by 3.8 by 1cm

Additional product info;
You can stick this on the back of your smartphone to support holding it or change the ring’s angle and use it as a stand!

– This product does not completely prevent the fall of a smartphone when attached.
– It cannot be used on surfaces made of glass, or smartphones and cases treated with anti-fouling or anti-fingerprint coatings.
– Please check the manufacturer’s compatibility chart (※This will redirect you to another site) before purchasing.
– If the part where this is attached is a lid used for battery replacement or memory card access, the lid may come off during use.
– Please clean the area where you will apply this product before use.
– Using it with dirt or oil left on may reduce its adhesive strength.
– Depending on your smartphone, it may not function as a stand.

Pokemon Center iPhone15/14/13 Compatible Square Glass Case Red Fuecoco Crocalor Skeledirge

pkversion — Tue, 15 Oct 2024 09:42:04 +0000

Size is approx. 15.1 x 7.6 x 1.2cm

On the back of the case, strong tempered glass resistant to scratches is used, and the entire side is made of TPU material, creating a durable hybrid case! Since the design is made of glass, you can enjoy a high-gloss design.

– This product is a case designed for iPhone 15/14/13. It is not compatible with other models of iPhone.
– This product does not provide complete protection from scratches or impacts. It is also not designed to withstand strong impacts such as drops.
– The camera lens is not protected by this product.
– This product is made of glass and may crack from drops or impacts. Please be aware that we cannot compensate for this due to the nature of the product.
– Adhesive-type smartphone rings cannot be used with this product.
– You can charge with a MagSafe Charger, but it may take longer. Please note that the magnetic force will also be weaker.
– This product is not compatible with the MagSafe Leather Wallet.

Fuecoco Crocalor Skeledirge

Pokemon Center Original Phone Ring Attachment Plus Strap Sprigatito

pkversion — Tue, 15 Oct 2024 09:41:20 +0000

Size is approx. 89.0 cm by 10 cm by 5.2 cm

You can use it as a multi-holder shoulder strap by simply inserting it into your smartphone case!

The strap is adjustable for length, making it user-friendly.

If you remove the strap, you can use the round carabiner to support holding your smartphone or attach it to bag handles, etc.

– This product is a shoulder strap type.
It is recommended for smartphone cases with a charging port size of width 10-15mm and thickness 6.5mm or more.

Pokemon Center Mobile Acrylic Strap Espeon

pkversion — Tue, 15 Oct 2024 09:29:12 +0000

Size is approx: 11.5 by 5.8 by 1.0cm

Additional product info:
It is an acrylic charm with a strap that can be attached to mobile phones and smartphones.

You can remove the strap (the black cord) and attach it to bags, pouches, etc. as a charm.

Please do not apply strong force while using this product.

Do not wrap the cord around fingers or other body parts.

Pokemon Center Iphone 15/14/13 Compatible Square Glass Case Blue Sprigatito Floragato Meowscarada

pkversion — Tue, 15 Oct 2024 07:49:19 +0000

Size is approx. 15.1 x 7.6 x 1.2cm

On the back of the case, strong tempered glass is used to protect against scratches, and the entire side is made of TPU material, making it a durable hybrid case! The design features glass, allowing you to enjoy a high-gloss design.

– This product is a case for iPhone 15/14/13. It is not compatible with other iPhones.
– This product does not completely protect against scratches or impacts, and does not withstand strong impacts such as drops.
– The camera lens is not protected.
– This product uses glass, so it may crack due to drops or impacts. Please note that we cannot compensate for this.
– Adhesive type smartphone rings cannot be used with this product.
– You can charge with a MagSafe Charger, but charging time will be longer. Also, the magnetic force will be weaker, so please understand this beforehand.
– This product is not compatible with the MagSafe Leather Wallet.

Sprigatito Floragato Meowscarada